top of page
injection machine_IMK2v1_final.1155.png
230V | 110V
IMK2

injection moulding machine

Our plasticpreneur injection moulding machine turns plastic waste into new products. 

Applied by hundreds of users around the world in a wide range of applications, our injection moulding machine is the go to choice to experience and access the benefits of injection moulding.

List price 

5,890 € (excl. VAT)

Included: tools & safety gear set and

spinning top mould

shop now | inquiry form

EXPLORE

experience and showcase the recycling process hands-on

CREATE

fast and cost effective way to create prototypes

MANUFACTURE

small batch to series production of tens of thousands of units

IMK2

machine
features

Optimised user experience through iterations with hundreds of users.

Smooth work process and fast cycle times through the modular spring clamping system.

Unique marbling effect of the injected products possible.

custom designed, mainly EU-made, high quality components.

1

2

3

4

plasticpreneurimk2 injection moulding machine plastic recycling

CERTIFIED

CE/UKCA-certified & third party approved

EFFICIENT

energy efficient & optimised performance

RELIABLE

industrial components & maintenance friendly

WORKFLOW

pre-assembled & ready to use within minutes

230V | 110V
IMK2 - Injection moulding machine

standout qualities

230V | 110V
IMK2 - Injection moulding machine

technical
features

  • IMK2 - 230 V: 

    Electric: 200-240 V, 50-60 Hz

    Max. power consumption: 1,200 W, 5.2-5.5 A

    IMK2 - 110 V:

    Electric: 100-120 V, 50-60 Hz, 

    Max power consumption: 1,200 W, 10.4-11 A
     

    Heating elements power: 1200 W

    Workflow power consumption
    Start to operating temperature:
    100 W (~7 minutes)
    Workflow, heating + injection Cycle: 250 W/h

    Max. temperature: 300 C°

    Plug Types 

    Type F (EU), Type G (GBR), Type B (USA, CAN, JPN)

  • Dimensions: 90 x 70 x 160 cm (L x W x H) 

    Weight: 30.5 kg 

    Shipping dimensions: 120 x 60 x 30 cm
    (L x W x H) 

    Shipping weight: 38.5 kg
    (including accessories kit)

    Packaging: cardboard parcel

  • CE, UKCA

    DIN EN 60204-1, DIN EN 61439-1, DIN EN 61439-2,
    DIN EN ISO 12100

  • Setup: wall or floor mounted, stand alone, portable

    Nozzle thread: male G1“ 

    Injection pressure: max. 70 bar 

    Shot volume: max. 175 cm³ / 115 g 

    Plastic melting time: ca. 7-10 minutes 

    Full cycles (heating & injecting) per hour: max. 7 times each 115 g 

    Output: ca. 1 kg

    Noise: XX dB

    Customs tariff number: HS84771000

IMK2-injection

distinctive features

plastic preneur imk2 injection moulding machine modular spring clamping syste

modular spring clamping system 

enables fast cycle times and a smooth process with a seamless way of attaching and changing moulds.

plasticpreneur  imk2 injection moulding machine stand-alone portable

stand-alone & portable

ideal for a good workflow, safe process, and easy transport.

plasticpreneur imk2 injection moulding machine wheel, injection process

manually operated injection process 

for a perfect finish as well as assisting with the learning experience while working with it.

plasticpreneur imk2 injection moulding machine fill level indicator and side table

fill level indicator and side table 

measures the available injection volume and offers additional space for tools, safety gear, etc.

plasticpreneur imk2 injection moulding machine additional safety features

additional safety features

excess pressure covers and over temperature sensor for releasing residual humidity and avoiding overheating.

plasticpreneur imk2 injection moulding machine custom made heating elements

custom made,  heating elements

stainless steel heating elements with asymmetrical heating distribution to reduce energy consumption and optimise the plastification process.

more destinctive features

  • Silent through the manually operated system.

  • Rates high precision detail injection parts of decent size. Five-plus times larger injection volume than existing industrial micro injection moulding machines.

  • Compatible with flakes, granules, and pellets.

  • Custom made industrial insulation to reduce energy consumption and the plastification process as well as an electronic cabinet with top tier components and required safety cycles.

  • For long lasting and sustainable use. For instance heating elements can be exchanged with a plug and play system within minutes.

  • Lightweight, rigid and self-supporting structure with a unique design.

  • For safe shipping and transport to the areas of application.

injection moulding process

The injection process consists of two main cycles, heating and the injecting cycle. 

plasticpreneur imk2 injection moulding process 1

Shredded plastic flakes or granules are fed through the hopper into the barrel. Heating elements melt the plastic to the set temperature for approximately 7 minutes.

The heated plastic is then injected, by manually turning the handwheel and pushing down the piston into the mould, which has been set in place with the spring clamping system.

plasticpreneur imk2 injection moulding process 2
plasticpreneur imk2 injection moulding process 3

After releasing, the mould can be opened immediately, and the newly created product taken out. If there is plastic left in the barrel it can be injected instantly into the next mould.

One barrel-filling can be either injected completely in one or various moulds before refilling, or new material can be added continuously to shorten the heating cycle.

plasticpreneur imk2 injection moulding process 4
plasticpreneur imk2 injection moulding process  5

If flakes of different colours are mixed, a unique marbling effect occurs. This results in a unique, one-of-a-kind finish that stands out from traditional plastic products.

  • Recommended for polyolefins: PP, HDPE

    Compatible with: PS, ABS, LDPE (rigid), PLA, TPU. Ability to test other materials such as biodegradable etc. 

     

    We assume no liability if materials other than those recommended are used. For other materials (e.g. biodegradable plastics) if applicable we can provide information as well as material tests. 

     

    Not recommended for use: PET, PA, PC (are hygroscopic and need to be dried before use)

     

    Never to use: PVC, PTFE


    For a good workflow we recommend at least MFR 8 or higher.
    The MFR (Melt Mass-Flow Rate) affects the characteristics of the injected object.

    We recommend using flake size of < 5 mm or industrial granules. The flake size determines the heating cycle and therefore is decisive for the melting time and output volume.

  • An accessory kit consisting of all needed parts to ensure safe and easy set up, as well as for maintenance are included.

     

    This includes:

    • Tool & safety gear set including

      • Ring spanner, allen key, flat screwdriver, nozzle key

      • Timer, wall scraper, utility knife, side cutters

      • Heat-protective gloves, safety glasses (filter mask not included)

    • Spinning top mould 

    • Floor and wall mounting set

  • To safely operate the machine, heat-protective gloves, safety glasses, and a filter mask are needed. Additionally we recommend using the plasticpreneur fume extractor FEMK1.

     

    If common PP or HDPE is heated at the right temperature and the fumes are extracted with the FEMK1, the air is under 10% of the maximum threshold value.

  • We ship worldwide.

    The machine comes in tailor made packaging on a half pallet in a wooden or cardboard box, via freight-forwarding. If ordered in a set with other machines it comes on a pallet.

the workflow

1

You are ready to create your first products within minutes. All of the necessary tools and safety gear for getting your machine operational are included.

2

The machine can be either mounted to the wall or used stand-alone in a well ventilated and dry room. It is easily movable from one place to the other.

3

For an ideal workflow we suggest a well ventilated room, a space of 3-4 m², and a stable workbench to open and close the moulds.

4

Additionally we recommend using the plasticpreneur fume extractor to extract and filter the air in the working area.

getting started

bottom of page